Carbon fibre roving

We supply a range of carbon roving spools for winding, pultrusion, hand lay-up and other special applications.

Rovings are bundles or strands of many individual continuous filaments lying almost parallel and straight alongside each other. They are held together by a binder, in this case the sizing.

The strands can easily be fanned out or combined into thicker bundles and laid up.

They are therefore well suited to hand lamination and many other processing methods, and allow the reinforcement to be aligned optimally with the direction of load, for example as tension/compression caps in wing spars, struts for complex structures, longitudinal and radial reinforcements in tube constructions, stabilisation of cut-outs and frame structures, local reinforcements and much more.

Available from stock:

	Tensile strength [MPa]	Tensile modulus [GPa]	Elongation [%]	Density [g/cm³]	Mass per Unit Length	Bobbins of
Tenax STS40 24K	4300	235	1,8	1,78	1600 tex	4 kg
Tenax HTS40 24K	4400	230	1,9	1,77	1600 tex	4 kg
Tenax-E IMS65 24K	6000	290	2,1	1,78	830 tex	1 kg
Tenax-E UTS50 24K	5100	245	2,1	1,78	1630 tex	6 kg

further types available on request